SI-15 RTK Surveyor
SKU: UAV-S15-004·Survey & Inspection Drones·In Stock
Overview
The SI-15 is the workhorse of our mapping range, built for land surveyors, civil engineering contractors and drone service providers who need defensible georeferenced output from a single flight. Its dual-constellation RTK receiver holds position to 1 cm + 1 ppm after post-processing, and the mechanical shutter on the 45 MP camera eliminates rolling shutter distortion on high-speed oblique captures, which matters when mapping building facades or structures under vibration. One battery flies 34 minutes and covers roughly 2.4 hectares per flight at 100 m, and the camera can fire a burst every 0.8 seconds with mechanical or electronic interval shooting. Obstacle sensing covers omnidirectional front and down directions, while the 6.5 kg takeoff weight keeps the aircraft under the registration threshold in most European markets. The RTK base station can be purchased separately for extended missions beyond 15 km.
Technical specifications
Performance
- Max Takeoff Weight
- 6.5 kg
- Empty Weight
- 3.4 kg
- Mapping Area per Flight
- 2.4 ha
Payload
- Payload Capacity
- 1.6 kg
- Camera Resolution
- 45 MP
- Sensor Type
- 1" CMOS
- Gimbal Rotation Range
- -90 to +15 °
- Camera Stabilization
- 3-axis mechanical
Flight
- Flight Time
- 34 min
- Max Speed
- 15 m/s
- Max Wind Resistance
- 10.5 m/s
- Hover Accuracy
- 0.03 m
- RTK Positioning Accuracy
- ±1 cm + 1 ppm
- Transmission Range
- 15 km
- Positioning Modes
- RTK / PPK / GNSS
- Obstacle Avoidance
- Omnidirectional + downward
- Max Takeoff Altitude
- 4500 m
Power & battery
- Battery Capacity
- 15000 mAh
- Charging Time
- 60 min
- Batteries Included
- 3 pcs
Compliance
- Protection Rating
- IP43
- Operating Temperature
- -20 to 50 °C