SST810 Dynamic Inclinometer Features
- Мин. заказ
- 1
Показано 1-24 из 134
SST810 Dynamic Inclinometer Features
高动态卫星导航接收机可实现多系统组合导航的定位授时功能，满足用户机载、弹载等高速动态应用需求。适用于具有高动态旋转载体的应用。
ZT series small vertical gyro is specially designed for small unmanned aerial vehicle and light missile. It can accurately measure the deviation angle of the aircraft relative to the vertical line, and output the corresponding analog signal for the airborne equipment to record. This series of produc
Product introduction and use
Product introduction and use
This product adopts full temperature 0.01 / h high-precision closed-loop optical fiber gyroscope and 20 G high precision quartz accelerometer, pure inertial navigation accuracy lnmile / h (cep50); The product has built-in measurement level multi-mode and multi frequency satellite receiver, and uses
SNC200-IMU is an inertial measurement unit (IMU) based on MEMS technology. It has built-in high-performance MEMS gyroscope and MEMS accelerometer, and outputs 3 angular velocities and 3 accelerations.
SNC200C-IMU MEMS is a domestic inertial measurement unit (IMU) based on MEMS technology. It has built-in high-performance MEMS gyroscope and MEMS accelerometer, and outputs 3 angular velocities and 3 accelerations.
SNC200A-IMU MEMS Inertial Measurement Unit is an inertial measurement unit (IMU) based on MEMS technology. It has built-in high-performance MEMS gyroscope and MEMS accelerometer, and outputs 3 angular velocities and 3 accelerations.
SNC200B-IMU is an inertial measurement unit (IMU) based on MEMS technology. It has built-in high-performance MEMS gyroscope and MEMS accelerometer, and outputs 3 angular velocities and 3 accelerations.
SNC100C-DGI integrated navigation system is composed of MEMS sensors and high-end GNSS receiver board (novatel-718d), which is realized by multi-sensor fusion and navigation algorithm. The product has high reliability and strong environmental adaptability. By matching different software, the product
SNC300C-B0 is a compact inertial navigation system using fiber optic gyroscope (FOG) and micro electro mechanical system (MEMS) accelerometer. It can use external GNSS accurate timing and positioning information for Inertial / satellite integrated navigation. When external GNSS information is invali
SNC300D-DGI is based on cost-effective closed-loop fiber optic gyroscope, accelerometer and high-end GNSS receiving board. It is realized through multi-sensor fusion and navigation solution algorithm to meet the requirements for accurate measurement of attitude, heading and position in application f
SNC500A fiber integrated navigation system is based on high-precision closed-loop fiber optic gyroscope, accelerometer and high-end GNSS receiving board, through multi-sensor fusion and rotation modulation navigation solution algorithm, to provide high-precision attitude, speed and position informat
SNC300A-DGI is based on cost-effective closed-loop fiber optic gyroscope, accelerometer and high-end GNSS receiving board. It is realized through multi-sensor fusion and navigation solution algorithm to meet the requirements for accurate measurement of attitude, heading and position in application f
SNC200A-E inertial navigation system has built-in high-performance MEMS gyroscope and accelerometer, which can receive external GNSS data, realize multi-sensor fusion and integrated navigation solution algorithm, and has short-term inertial navigation capability when GNSS is invalid.
SNC100C-LITE integrated navigation system has built-in high-performance MEMS gyroscope and accelerometer, which can receive internal GNSS data, realize multi-sensor fusion and integrated navigation solution algorithm, and has short-term inertial navigation ability when GNSS is invalid. The product h
DH-IF3 series three channel high-precision I / F converter adopts the principle of "charge balance", which can continuously measure the input signal without losing information; It has high conversion accuracy, optional signal frequency, low cost and high reliability. It has been applied to vehicle a
DH-G60S series single axis fiber optic gyroscope is an all solid-state medium precision single axis fiber optic gyroscope integrating optics, mechanics and electricity. It follows the classic design concept of traditional fiber optic gyroscope and adopts mature fiber optic gyroscope manufacturing te
DH-G50DA series dual axis fiber optic gyroscope is an all solid state medium precision dual axis fiber optic gyroscope integrating optics, mechanics and electricity. It follows the classic design concept of traditional fiber optic gyroscope and adopts mature fiber optic gyroscope manufacturing techn
DH-G60TA series three-axis fiber optic gyroscope is an all solid-state medium Precision Three-Axis fiber optic gyroscope integrating optics, mechanics and electricity. It follows the classic design concept of traditional fiber optic gyroscope and adopts mature fiber optic gyroscope manufacturing tec
DH-GS OS series single axis fiber optic gyroscope is an all solid-state medium precision single axis fiber optic gyroscope integrating light, machinery and electricity. It follows the classic design concept of traditional fiber optic gyroscope and adopts mature fiber optic gyroscope manufacturing te
DH-G98S series single axis fiber optic gyroscope is an all solid-state high-precision single axis fiber optic gyroscope integrating light, machinery and electricity. It follows the classic design concept of traditional fiber optic gyroscope and adopts mature fiber optic gyroscope manufacturing techn
DH-G120S series single axis fiber optic gyroscope is an all solid-state high-precision single axis fiber optic gyroscope integrating light, machinery and electricity. It follows the classic design concept of traditional fiber optic gyroscope and adopts mature fiber optic gyroscope manufacturing tech