Use: Target drone, Universal UAV, Nearly 200 have been produced
- Commande minimum
- 1
Affichage de 97 à 120 sur 253
Use: Target drone, Universal UAV, Nearly 200 have been produced
CH-170 A small target drone with low cost used in combat training manufacturer.
WJ-500 drone is a jet powered UAV developed by CASIC intended for various missions, such as targeting, reconnaissance, target damage assessment, and simulation of cruise missiles and aircraft. WJ-500 drone has a cylindrical fuselage with inlet atop the empennage. Wing tip tank can be installed on th
1， It adopts zero-length rocket propelled launch and turbojet engines, which has high speed and high ceiling.
The CH-805 stealth high speed target drone is a high-speed, stealth-capable target aircraft, which uses the same aerodynamic wing layout as the B-2, the most advanced strategic bomber in service. With excellent radar stealth performance, it can be used to simulate aircraft flight characteristics, as
High-speed target drone HK-150B for subsonic using unmanned aerial vehicle (uav), the use of small turbojet engine as power, mainly carrying drag the light tube, luneberg ball, differential GPS positioning equipment tasks such as load, has the characteristics of high speed, low altitude, and can be
2 Overall layout and key parameters
Chinese firm Tsingaero Armament showcased its JZ-500 UAV, a strike-capable rotary-wing unmanned aerial vehicle (UAV), at the Airshow China 2022 exhibition in Zhuhai, which concluded on 13 November.
The GQ-580 unmanned helicopter adopts a tandem dual-rotor layout, which is very suitable for plateau environments. Compared with the conventional layout, the tandem dual-rotor layout avoids 10%-15% or even higher power consumption due to the cancellation of the tail rotor to maintain flight balance,
SY-450H is a large coaxial helicopter product independently designed by our company, with a take-off weight of 450 kg. This model adopts a coaxial double-layer rotor design, which reduces the length of the aircraft for easy transportation; adopts a 115-horsepower turbocharged engine, which solves th
Chinese aero-industry has full-embraced the concept of indigenous Unmanned Aerial System (UAS) design and development. This goes beyond the typical short- and medium-altitude fixed-wing performers and now includes unmanned rotorcraft such as the AR-500C by aviation Industry Corporation (AVIC) of Chi
The LJ-320 unmanned helicopter is a new generation product independently developed by the company. Its dual rotors are in a tandem layout, with high engine working efficiency, a wide range of fuselage center of gravity configurations, and strong wind resistance. Space is small. It has the distinctiv
The LJ-500 unmanned helicopter is a dual-rotor tandem unmanned helicopter developed by our company. It has the characteristics of large load capacity, high stability, fully independent research and development, and strong integration capabilities. It is widely used in military and civilian dual-use
FWH-1000 unmanned helicopter system is a new general-purpose high-load unmanned helicopter with payload capacity up to 150kg. The whole machine has mature technology and stable performance, which can be used in various complex and harsh environments.
FWH-1500 unmanned helicopter system is a large load unmanned helicopter independently developed by Hangjing Innovation. The maximum takeoff weight is more than 1000kg, the payload is 300kg, and the endurance time is more than 5h. It has excellent plateau performance and is a common unmanned helicopt
China s China North Industries Group Corporation Limited (NORINCO) was recently cleared to export its reconnaissance-attack helicopter drone system, the CR500 Golden Eagle.
China s first ship-borne helicopter drone makes maiden flight
ZK600-M drone is a coaxial twin-rotor unmanned helicopter with vertical lift, stable hover, ultra -low ground-skimming and other dynamic characteristics. It can also accomplish fixed-point ultra long time stable flight, large attitude, large Angle dynamic flight and exploration flight of threatening
Master key Mk series of unmanned aerial vehiclemake it lighter, and have larger rotor disc surface than traditional helicopter. So Mk can doubles the takeoff weight and has only quarter transportation volume than other UAS in same gross weight.
The T333 unmanned helicopter uses a coaxial dual-rotor configuration, a streamline shape design and a non-bearing composite rotor. It also features DHM paddle, a "H-type" tail and a rear three wheel retractable landing gear. According to ZHZ, the T333 is equipped with a technical diagnosis system.
AV-200 hnmanned helicopter is developed by CHRDI and produced by CAIC. AV-200 hnmanned helicopter based on the experience gained from U8E, and it is named as its maximum take-off weight of 200 kg. Like U8E, AV-200 hnmanned helicopter is also an unmanned helicopter in conventional layout with a pair
AV500 Unmanned helicopter is developed by CHRDI and produced by CAIC. AV-500 based on the experience gained from U8E Unmanned helicopter.
TD220 Unmanned Helicopter drone are Chinese UAVs developed by ZHZ Science and Technology Ltd. A total of two ZHZ UAVs have had developed and both are unmanned helicopters.
General introduction: "agile - Ⅲ" type of unmanned helicopter system is based on mature single-seat manned helicopter platform developed by a civil-military dual-purpose small unmanned helicopter system, flight performance stable and reliable, and takeoff and landing, fixed-point hover, with indepen